1. Maintenance operations performed after the first 2500 km of a new vehicle:
Make sure that there are no extraneous noises or knocks when the engine is running.
Check the tightness of the fasteners of the power unit supports.
Make sure there are no engine oil leaks through the engine seals and oil seals (see "Engine - technical condition check").
Replace engine oil and oil filter (see "Engine Oil and Oil Filter - Replacement").
Check functionality (by the presence of fault codes) engine management systems (see "Checking the technical condition of the engine management system").
Make sure that there are no extraneous noises when engaging and disengaging the clutch (see "Clutch - checking technical condition").
Check the clarity of gear shifting, make sure there are no extraneous noises or knocks when the gearbox is operating (see "Automatic transmission - technical condition check" and "Manual gearbox - checking technical condition").
Make sure that there are no extraneous noises in the front wheel drive joints when the vehicle is moving in a straight line and when turning (see "Front Wheel Drives - Checking Technical Condition").
Make sure that there are no extraneous noises in the front and rear suspensions when the vehicle is driven over uneven surfaces (see "Checking the technical condition of the front suspension" and see. "Checking the technical condition of the rear suspension").
Check the wheel alignment angles at a specialized service station.
Make sure the electric power steering is working properly (see "Steering - checking technical condition").
Make sure there are no brake fluid leaks, check the condition of the hoses and tubes of the hydraulic brake system (see "Brake system - checking technical condition").
Check and, if necessary, adjust the position of the brake light switch (see "Brake Light Switch - Replacement").
Check the operation of the parking brake (see "Brake system - checking technical condition").
Check the efficiency of all brake mechanisms (see "Brake system - checking technical condition").
Check the brake fluid level in the master cylinder reservoir (see "Brake fluid level").
Check the functionality of the brake booster (see "Checking the service brake system drive").
Check the condition and tension of the alternator drive belt (for a car with a tensioner).
Make sure that the lighting system lamps, light signaling system and sound signal are in good working order (see "Lighting, light and sound signaling").
Check the functionality of the electric headlight corrector (see "Governing bodies").
Check and, if necessary, adjust the direction of the headlight beams (see "Headlight unit - light adjustment").
2. After every 15,000 km of vehicle mileage, it is necessary to perform all operations performed at 2,500 km, as well as:
Check the tightness of the exhaust system and the condition of the muffler suspension parts (see "Checking the technical condition of the exhaust system").
Replace the accessory drive belt (see "Auxiliary Drive Belt - Replacement").
Check the condition and tension of the timing belt (see "Timing Belt - Checking Condition").
Make sure there are no coolant leaks, check the condition of the hoses and radiator of the engine cooling system (see "Checking the technical condition of the cooling system").
Check the coolant level in the expansion tank of the engine cooling system (see "Checking the technical condition of the cooling system").
Check the tightness of the fuel lines and hoses (see "Checking the technical condition of the power supply system").
Check the amount of play in the steering (see "Steering - checking technical condition").
Check the condition of the protective covers of the steering rods and steering gear (see "Steering - checking technical condition").
Check the condition of the front and rear suspension parts (see "Checking the technical condition of the front suspension" and see. "Checking the technical condition of the rear suspension").
Check the degree of wear of the front brake shoe linings (see "Checking the front brake mechanism").
Check the gearbox oil level (see "Manual transmission - checking the transmission oil level" or see. "Automatic transmission - checking the oil level"), make sure there are no leaks through the seals and oil seals of the gearbox.
Check the condition of the gearshift drive protective boots (see "Manual transmission")
Check the degree of wear of the rear brake shoe linings (see "Checking the rear brake mechanism") and lubricate the guide pins.
Check the condition of the protective covers of the front wheel drive joints (see "Front Wheel Drives - Checking Technical Condition").
Check the level and density of the electrolyte in the battery (see "Battery - Maintenance").
Make sure the generator is in good working order (see "Generator").
Check the serviceability of the windshield wipers and washers in all operating modes (see "Windscreen wiper and washer").
Check the serviceability of the rear window heating (see "Governing bodies").
Check the serviceability of the electric window lifts and outside mirrors (see "Governing bodies").
Check the functionality of the seat heating (depending on the configuration).
Lubricate the hinges and door opening limiters (see "Body maintenance").
Make sure that the door and hood locks are in good working order (see "Body - technical condition check"), seat mechanisms and seat belts.
Clean the drainage holes in the doors and sills (see "Body maintenance").
Check the serviceability of the air conditioning system (see "Air conditioning system - technical condition check").
Replace the filter element of the cabin ventilation system (see "Air Conditioning Filter - Replacement"),
3. After every 30,000 km of vehicle mileage, it is necessary to perform all operations performed at every 15,000 km mileage, as well as:
Replace the air filter element (see "Air filter - replacing the filter element").
Replace spark plugs (see "Spark plugs - replacement").
Clean and lubricate the battery terminals and posts (see "Battery - Maintenance").
Lubricate the door and hood locks (see "Body maintenance").
Check the condition of the tires and rims (see "Checking the technical condition of disks, tires and hubs").
Check and, if necessary, balance the wheels (see "Checking the technical condition of wheels, tires and hubs"),
4. After every 45,000 km of vehicle mileage, it is necessary to perform all operations performed at every 15,000 km mileage, as well as:
Replace the brake fluid in the hydraulic brake system (or after three years, whichever comes first, see. "Hydraulic brake drive - brake fluid replacement").
Lubricate the hood lock drive cable (see "Body maintenance").
5. After every 90,000 km of vehicle mileage, it is necessary to perform all operations performed at every 30,000 km mileage, as well as:
Replace the coolant in the engine cooling system (or after three years, whichever comes first, see. "Coolant - Replacement").
Replace the accessory drive belt and tension roller (see "Auxiliary Drive Belt - Replacement").
6. After every 180,000 km of vehicle mileage, it is necessary to perform all operations performed at every 15,000 km and 30,000 km mileage, as well as:
(The material was taken from a website: LADAman)
Replace the timing belt, tensioner and guide rollers (see "Timing Belt - Replacement").
Note: Brake and coolant fluids must be replaced every three years if the vehicle's mileage during this period is less than the above.