Drive shafts of the front wheels of the car Lada Vesta 1
itemprop="image"Basic data for monitoring, adjustment and maintenance
Table 10.4.1. Basic data for monitoring, adjustment and maintenance Type of lubricant SHRUS-4M Amount of lubricant to be added, cm³: outer hinge internal hinge 40 80 Diameters of clamps for fastening...
Table 10.4.1. Basic data for monitoring, adjustment and maintenance Type of lubricant SHRUS-4M Amount of lubricant to be added, cm³: outer hinge internal hinge 40 80 Diameters of clamps for fastening...
Description of the design of drive shafts
Left drive details: 1 - hub nut; 2 - nut thrust washer; 3 - outer hinge housing; 4 - large clamp of the outer hinge boot; 5 - protective cover of the outer hinge; 6 - small clamp of outer hinge boot;...
Left drive details: 1 - hub nut; 2 - nut thrust washer; 3 - outer hinge housing; 4 - large clamp of the outer hinge boot; 5 - protective cover of the outer hinge; 6 - small clamp of outer hinge boot;...
Checking the technical condition
The service life of the drive depends on the condition of its joints. The joints are quite durable and, provided the car is used carefully, can last more than 100 thousand km. As a rule, the outer...
The service life of the drive depends on the condition of its joints. The joints are quite durable and, provided the car is used carefully, can last more than 100 thousand km. As a rule, the outer...
Front Wheel Drive — Removal and Installation
To complete the work you will need: an inspection pit or overpass; new hub nut; new inner joint tailstock retaining ring. Removal 1. Prepare the car for work (see " Preparing the car for maintenance...
To complete the work you will need: an inspection pit or overpass; new hub nut; new inner joint tailstock retaining ring. Removal 1. Prepare the car for work (see " Preparing the car for maintenance...
Outer drive joint — removal, replacement of protective cover and installation
To perform the work you will need: special pliers for installing clamps for fastening CV joint covers or sliding pliers; external snap ring pliers; cV joint grease - 40 cm³; new hinge cover with new...
To perform the work you will need: special pliers for installing clamps for fastening CV joint covers or sliding pliers; external snap ring pliers; cV joint grease - 40 cm³; new hinge cover with new...
Inner drive joint — removal, replacement of protective cover and installation
Note: The work is shown using a ball-type joint as an example. The tripod type hinge is repaired in a similar manner. To perform the work you will need: special pliers for installing clamps for...
Note: The work is shown using a ball-type joint as an example. The tripod type hinge is repaired in a similar manner. To perform the work you will need: special pliers for installing clamps for...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More sections with information from manuals for Lada:
• Transmission: Drive shafts Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Transmission: Drive shafts Lada Granta 1 (2011-2023, VAZ-2190)
• Transmission: Drive shafts Lada Priora 1 (2007-2018, VAZ-2170)
• Transmission: Drive shafts Lada Largus 1 (2012-2023)
Link to this section in various formats
TEXTHTMLBB Code
- General information
- Governing bodies
- User manual
- Maintenance
- Troubleshooting
- Power unit
- Engine repair
- Control system
- Supply system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis (running gear)
- Wheels, tires and hubs
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Doors, locks and windows
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Power devices
- Breakers and switches
- Lighting and signaling
- Electrical circuits