Vehicle wheel drive shafts Lada Granta 1
Drive shaft reference data
Table 9.3.1. Basic data for monitoring, adjustment and maintenance Type of lubricant SHRUS-4M Amount of lubricant to be added, cm³: - external hinge 40 - internal hinge 80 Diameters of clamps for...
Table 9.3.1. Basic data for monitoring, adjustment and maintenance Type of lubricant SHRUS-4M Amount of lubricant to be added, cm³: - external hinge 40 - internal hinge 80 Diameters of clamps for...
Description of the design of drive shafts
Left drive details: 1 - hub nut; 2 - nut thrust washer; 3 - outer hinge housing; 4 - large clamp of the outer hinge boot; 5 - protective cover of the outer hinge; 6 - small clamp of outer hinge boot;...
Left drive details: 1 - hub nut; 2 - nut thrust washer; 3 - outer hinge housing; 4 - large clamp of the outer hinge boot; 5 - protective cover of the outer hinge; 6 - small clamp of outer hinge boot;...
itemprop="image"Checking the technical condition of the front wheel drives
The service life of the drive depends on the condition of its joints. The joints are quite durable and, provided the car is used carefully, can last more than 100 thousand km. As a rule, the outer...
The service life of the drive depends on the condition of its joints. The joints are quite durable and, provided the car is used carefully, can last more than 100 thousand km. As a rule, the outer...
Front Wheel Drive — Removal and Installation
To complete the work you will need: inspection ditch or overpass; new hub nut; new inner joint tailstock retaining ring. Removal 1. Prepare the car for work (" Preparing the car for maintenance and...
To complete the work you will need: inspection ditch or overpass; new hub nut; new inner joint tailstock retaining ring. Removal 1. Prepare the car for work (" Preparing the car for maintenance and...
Outer drive joint — removal, replacement of protective cover and installation
To complete the work you will need: special pliers for installing CV joint boot clamps or sliding pliers: external snap ring pliers; cV joint grease - 40 cm³; new hinge cover with new clamps; new...
To complete the work you will need: special pliers for installing CV joint boot clamps or sliding pliers: external snap ring pliers; cV joint grease - 40 cm³; new hinge cover with new clamps; new...
Inner drive joint — removal, replacement of protective cover and installation
To complete the work you will need: special pliers for installing clamps for fastening CV joint covers or sliding pliers; external snap ring pliers; cV joint grease 80 cm³; new hinge protective...
To complete the work you will need: special pliers for installing clamps for fastening CV joint covers or sliding pliers; external snap ring pliers; cV joint grease 80 cm³; new hinge protective...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More sections with information from manuals for Lada:
• Transmission: Drive shafts Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Transmission: Drive shafts Lada Priora 1 (2007-2018, VAZ-2170)
• Transmission: Drive shafts Lada Vesta 1 (2015-2023, VAZ-2180)
• Transmission: Drive shafts Lada Largus 1 (2012-2023)
Link to this section in various formats
TEXTHTMLBB Code
- User manual
- Governing bodies
- Vehicle operation
- Maintenance
- Radio receiver
- Radio receiver (option)
- Power unit
- Engine repair
- Control system
- Supply system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Car gearbox
- Drive shafts
- Chassis (running gear)
- Wheels, tires and hubs
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Interior (internal elements)
- Doors, locks and windows
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Power devices
- Breakers and switches
- Lighting and signaling
- Electrical circuits