Car rear suspension Lada Granta 1

Rear Suspension Reference Data
Table 10.3.1. Tightening torques for threaded connections Name of units and parts Thread Tightening torque, Nm (kgf·m) Wheel mounting bolts M12x1.25 65,2-92,6 (6,7-9,5) Rear wheel hub bearing nut...

Description of the rear suspension design
Rear suspension spring and shock absorber parts: 1 - spring; 2 - rubber gasket; 3 - casing cover; 4, 10 - shock absorber rod cushion; 5 - spacer sleeve; 6 - shock absorber housing; 7 - rod nut; 8 -...

Checking the technical condition of the rear suspension
The technical condition must be checked in accordance with the periodic maintenance regulations (" Periodic maintenance "). You can assess the technical condition of the suspension while the car is...

Shock absorber and spring rear suspension — removal and installation
Note: It is convenient to perform the work on an inspection pit. But if necessary, you can remove and install the spring and shock absorber of the rear suspension by placing the car on a flat...

Rear suspension beam — silent block replacement
To replace the silent block, it is not necessary to remove the beam from the car. We change the silent blocks one by one: first one, then the other beam arm. To complete the work you will need: car...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Chassis (running gear): Rear suspension Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Chassis (running gear): Rear suspension Lada Vesta 1 (2015-2023, VAZ-2180)
• Chassis (running gear): Rear suspension Lada X-Ray 1 (2015-2022)

Link to this section in various formats

TEXTHTMLBB Code