Car breakers and switches Lada Granta 1

Switches and Toggle Switches — General Description
The location and purpose of the switches installed in the instrument panel and in the floor tunnel trim are shown in Chapter " Controls and instrumentation ". Depending on the configuration, some...

Steering column switches — removal, inspection and installation
Position of the steering column shift levers: A - left steering column switch (headlight and turn signal switch); B - right steering column switch (wiper and washer switch) Note: The dotted lines...

Switches on the central console of the instrument panel — removal and installation
The central console trim contains the hazard warning switch 1, the rear window heating switch 3 and the air conditioning fan mode switch 2. Depending on the configuration, other switches may be...

Reverse Light Switch — Checking and Replacing
To carry out the work, you will need an inspection pit or overpass. Removal 1. Prepare the car for work (" Preparing the car for maintenance and repair "). 2. Remove the engine splash guard or...

Brake Light Switch — Checking and Replacing
Removal 1. Prepare the car for work (" Preparing the car for maintenance and repair "). 2. Press the lock to disconnect the wiring harness connector from the switch. 3. Using a 19 mm open-end wrench,...

Interior Light Switch — Checking and Replacing
1. Prepare the car for work (" Preparing the car for maintenance and repair "). 2. Pulling the latch towards you and overcoming the resistance, remove the switch. 3. Press the lock and disconnect the...

Power window switches — removal and installation
The electric window switches are installed in the door trim. The driver's door has a block with switches for all electric windows. Depending on the configuration, some cars may have window lifters...