Reference data for wheels, tires and hubs Table 10.1.1. Basic data for control, adjustment and maintenance Note. On vehicles with a model 2192 hub axle, a 15" wheel with a 6J rim and a 185/55R15 82H tire is acceptable. * The upper value is...
Description of the construction of wheels and tires The manufacturer installs the wheels on the car (discs) for tubeless tires 5Jx13H2 ET 35, 5Jx14H2 ET 35 or 5½Jx14H2 ET 35, where: 5 (5½) - rim width in inches; J - symbol of the rim profile; 13 (14)...
Checking the technical condition of wheels, tires and hubs To do the job, you will need a caliper with a depth gauge. Execution sequence 1. Before each trip, we carefully inspect the wheels of the car and their fastening elements. Each wheel is attached to...
Tires — pressure check The air pressure in a car tire is not constant. When the ambient temperature rises, the pressure in the tire increases, and when it decreases, it decreases. With small fluctuations in ambient...
Wheel — replacement To complete the work you will need: balloon wrench or socket wrench 17 mm; jack; anti-recoil stops; lining under the jack (if the machine is standing on loose ground). Execution sequence 1. We...
Front wheel bearing — replacement The bearing of a nave of a forward wheel unadjustable. If there is play in the bearing, it must be replaced. To complete the job, you will need a reliable car stand, an internal lock track remover...
Rear wheel bearing — replacement To complete the work you will need: two- or three-jaw puller; a stripper of internal lock rings; cup puller. Removing 1. We prepare the car for work (« Preparing the car for maintenance and repair...