Basic data for control, adjustment and maintenance Table 11.1.1. Basic data for control, adjustment and maintenance Rim size *1 6JX15H2 6JX16H2 Number and diameter of wheel studs (PCD), PC. x mm 4x100 Diameter of center hole of wheel disc *2 (Dia),...
General information about wheels and tires The manufacturer installs wheels with steel or alloy wheels for tubeless tires on the car (see above, « Reference data »). The alloy wheel markings are cast on the inside of the spokes. The marking...
Checking the technical condition of discs, tires and hubs We carry out work in accordance with the maintenance plan (see « Maintenance plan »). To do the job, you will need a caliper with a depth gauge. Execution sequence 1. Before each trip, we carefully...
Wheel care Wheel maintenance is not limited to regular tire pressure checks. The wheels must be washed and treated with special products, since a large amount of dirt accumulated on the disk and tire leads to...
Front wheel bearing — replacement The need to perform work is determined during the inspection of the technical condition of the front suspension (see « Checking the technical condition of the front suspension »). To perform the work...
Rear wheel bearing — replacement The need to perform work is determined during the inspection of the technical condition of the rear suspension (see « Checking the technical condition of the rear suspension »). To perform the work,...