Vehicle starting and charging system Lada Vesta 1
Technical data of the battery
Table 14.2.1. Battery technical data Name Values Model 6ST 62VL Type Maintenance-free Polarity Reverse Nominal voltage, V 12 Nominal capacity, Ah 62 Battery charging current, A 6 Cold cranking...
Table 14.2.1. Battery technical data Name Values Model 6ST 62VL Type Maintenance-free Polarity Reverse Nominal voltage, V 12 Nominal capacity, Ah 62 Battery charging current, A 6 Cold cranking...
Description of the battery design
Battery: 1 - body; 2 - lid; 3 - positive output; 4 - inter-element connection; 5 - negative terminal; 6 - cork; 7 - filler neck; 8 - separator; 9 - positive plate; 10 - negative plate Automotive...
Battery: 1 - body; 2 - lid; 3 - positive output; 4 - inter-element connection; 5 - negative terminal; 6 - cork; 7 - filler neck; 8 - separator; 9 - positive plate; 10 - negative plate Automotive...
Battery — Removal and Installation
The battery is removed for charging, replacement or other repair work to improve access to the engine compartment. Recommendation. Car batteries are produced in several types, differing in overall...
The battery is removed for charging, replacement or other repair work to improve access to the engine compartment. Recommendation. Car batteries are produced in several types, differing in overall...
Battery Maintenance
Note: There are rechargeable batteries available for sale. These batteries have holes for adding water and checking the density of the electrolyte. To complete the work you will need: fine-grained...
Note: There are rechargeable batteries available for sale. These batteries have holes for adding water and checking the density of the electrolyte. To complete the work you will need: fine-grained...
Description of the generator design
The generator is designed to generate electricity while the engine is running. The vehicle is equipped with a three-phase alternating current generator with electromagnetic excitation, a diode...
The generator is designed to generate electricity while the engine is running. The vehicle is equipped with a three-phase alternating current generator with electromagnetic excitation, a diode...
Checking the generator
To complete the work you will need an assistant, as well as: a multimeter (in voltmeter mode with a measurement range of 15-20 V); technical stethoscope. Sequence of execution 1. Prepare the car for...
To complete the work you will need an assistant, as well as: a multimeter (in voltmeter mode with a measurement range of 15-20 V); technical stethoscope. Sequence of execution 1. Prepare the car for...
Generator — removal and installation
Removal 1. Prepare the vehicle for work and install it on an inspection ditch or overpass (see " Preparing the car for maintenance and repair "). 2. Disconnect the wire terminal from the negative...
Removal 1. Prepare the vehicle for work and install it on an inspection ditch or overpass (see " Preparing the car for maintenance and repair "). 2. Disconnect the wire terminal from the negative...
Description of the starter design
The starter is a four-pole electric motor with excitation from permanent magnets, equipped with a starter drive and a pull-in (traction) relay. Starter details: 1 - drive; 2 - front cover; 3 -...
The starter is a four-pole electric motor with excitation from permanent magnets, equipped with a starter drive and a pull-in (traction) relay. Starter details: 1 - drive; 2 - front cover; 3 -...
Starter — removal and installation
Removal 1. Prepare the vehicle for work and install it on an inspection ditch or overpass (see " Preparing the car for maintenance and repair "). 2. Disconnect the wire terminal from the negative...
Removal 1. Prepare the vehicle for work and install it on an inspection ditch or overpass (see " Preparing the car for maintenance and repair "). 2. Disconnect the wire terminal from the negative...
Checking and repairing the starter
Note: Depending on the malfunction that has occurred, the sequence and scope of repair work may be changed. The most common starter faults: 1. The winding burns out or the contact bolts and contact...
Note: Depending on the malfunction that has occurred, the sequence and scope of repair work may be changed. The most common starter faults: 1. The winding burns out or the contact bolts and contact...
This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian
More sections with information from manuals for Lada:
• Electrical equipment: Power devices Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Electrical equipment: Power devices Lada Granta 1 (2011-2023, VAZ-2190)
• Electrical equipment: Power devices Lada Priora 1 (2007-2018, VAZ-2170)
• Electrical equipment: Power devices Lada Largus 1 (2012-2023)
Link to this section in various formats
TEXTHTMLBB Code
- General information
- Governing bodies
- User manual
- Maintenance
- Troubleshooting
- Power unit
- Engine repair
- Control system
- Supply system
- Cooling system
- Exhaust system
- Transmission
- Clutch
- Mechanical gearbox
- Automatic gearbox
- Drive shafts
- Chassis (running gear)
- Wheels, tires and hubs
- Front suspension
- Rear suspension
- Steering
- Brake system
- Body and interior
- Exterior (external elements)
- Doors, locks and windows
- Heating and ventilation
- Electrical equipment
- Equipment and devices
- Power devices
- Breakers and switches
- Lighting and signaling
- Electrical circuits
