Exterior (external body parts) Lada Vesta 1

Reference data about the car body
The threaded connections of the body parts are made with bolts made of ordinary carbon steel. For critical connections, heat-treated chromium alloy steel bolts are used, marked with the "X" symbol on...

itemprop="image"

General description of the car body
The car body is all-metal, welded, load-bearing structure (frameless). Removable body elements: front fenders, hood, doors, bumpers. Door window lifters can be either mechanically or electrically...

Body — technical condition check
We check the technical condition of the body during each maintenance (see " Maintenance plan "). During intensive use, especially in winter, the body must be checked and serviced 1.5-2 times more...

Body maintenance
Lubrication of hinges and locks To prevent wear of parts of locks, hinges and opening limiters, it is necessary to periodically (for example, twice a year: in autumn and spring) lubricate them. It is...

Hood lock — removal, installation and adjustment
Access to the lock is obstructed by the radiator grille. Sequence of execution 1. Use a marker to mark the position of the lock. 2. Using a 13 mm socket or open-end wrench, unscrew the two nuts...

Front bumper — removal and installation
The front bumper consists of a decorative plastic trim and a reinforcement. As a rule, only the decorative cover breaks from a slight impact, which can be replaced separately. It is more convenient...

Front mudguard — removal and installation
The front mudguard is removed for replacement, and also if necessary when performing other repair work. It is more convenient to perform the work with an assistant on an inspection ditch or overpass....

Fuel filler cap — removal and installation
When choosing paint for a car, it is useful to have, in addition to the paint code, some part painted in the color of the car body. The fuel filler cap is ideal for this purpose. Sequence of...

Rear bumper — removal and installation
The rear bumper consists of a decorative plastic trim and a reinforcement. As a rule, only the decorative cover breaks from a slight impact, which can be replaced separately. Recommendation. Before...

Trunk lock — removal and installation
1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Using a 10 mm wrench, unscrew the two mounting bolts... ...and we remove the lock from the door. 3. Disconnect...

Trunk lid lock switch (cylinder)
1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the trunk lid trim (see " Trunk lid trim - removal and installation "). 3. Turn the holder... ...and...

Trunk lid trim — removal and installation
1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Using a slotted screwdriver, push out the clamps... ...and we extract... ...ten holders. 3. Remove the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Body and interior: Exterior (external elements) Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Body and interior: Exterior (external elements) Lada Granta 1 (2011-2023, VAZ-2190)
• Body and interior: Exterior (external elements) Lada Priora 1 (2007-2018, VAZ-2170)
• Body and interior: Exterior (external elements) Lada Largus 1 (2012-2023)
• Body and interior: Exterior (external elements) Lada X-Ray 1 (2015-2022)

Link to this section in various formats

TEXTHTMLBB Code