It is more convenient to perform work with an assistant on a viewing ditch or overpass.
In the work, we remove the left fender liner, the right fender liner is removed in the same way.
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. Using the TORX T20 wrench, we unscrew the two screws securing the front wheel mudguard.
3. We put forward the latch...
...and remove the front holder.
4. Similarly, we release the lower holder...
...and remove the mudguard.
5. Using the TORX T20 wrench, unscrew the two screws of the bottom...
...two screws of the side fastening of the fender liner to the front bumper cover...
...and two screws securing the fender liner to the subframe.
6. Using the TORX T20 wrench, unscrew the screw of the rear fender liner.
7. We put forward the latches and remove the four holders.
8. Remove the fender liner.
9. Install all removed parts in reverse order.