Basic data for control, adjustment and maintenance Table 10.2.1. Basic data for control, adjustment and maintenance Gearbox Model JH3 Gearbox modification 510 Gearshift drive type Rope Number of gears 5 Gear ratios: I-transfer II gear III gear IV...
Manual Transmission Reference Data The manual gearbox is a five-speed, two-shaft, combined with the main gear and differential into a single unit. The gearbox housing is aluminum, consists of two parts. The gearbox and clutch housing...
Manual transmission — checking the technical condition Before proceeding to check the technical condition, check the oil level in the gearbox (see « Manual Transmission - Checking the Gear Oil Level »). In a gearbox operated with a low oil level in the...
Checking the transmission oil level We carry out work in accordance with the maintenance plan (see « Maintenance plan ») - every 15,000 km of run. It is necessary to check the oil level if during the inspection of the car transmission...
Transmission oil change We carry out work in accordance with the maintenance plan (see « Maintenance plan ») - every 15,000 km of run. For a number of operations, for example, to replace the front wheel drive oil seal, it...
Front wheel drive oil seals — replacement The need to perform work is determined during the check of the technical condition of the gearbox (see « Manual transmission - checking the technical condition »). To replace the right drive seal,...
Manual transmission — removal and installation Removing the gearbox is necessary to repair it or replace clutch parts. To perform the work, you will need an inspection ditch or overpass, a device for hanging the power unit. Recommendation. This...