Exterior (external body parts) Lada Kalina 1

Body: reference data
The threaded connections of the body parts are made with bolts made of ordinary carbon steel. For critical connections, heat-treated chromium alloy steel bolts are used, marked with the "X" symbol on...

Description of the body structure
The car body is all-metal, welded, load-bearing structure (frameless). Removable body elements: front fenders, hood, doors, bumpers. In the windows of the front bumper on some cars, fog lights are...

itemprop="image"

Checking the technical condition of the body
To carry out the work, you will need an inspection pit or overpass. 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Inspect the car from the outside for paint...

Body maintenance
Lubrication of door hinges and stops, as well as cleaning of drainage holes should be performed at each periodic maintenance of the vehicle (every 15,000 km). Door keyholes should be lubricated 2-3...

Radiator grille — removal and installation
Removal 1. Prepare the car for work (see " Preparing a car for technical inspection and repair "). 2. Using a Phillips screwdriver, unscrew the three screws that secure the upper radiator grille. 3....

Hood — removal, installation and adjustment of position
Note: The work is shown with preliminary disassembly of the hood. But if necessary, the hood can be removed as a whole with the elements installed on it. To do this, simply disconnect the hose from...

Hood Lock Drive Rod — Replacement
Removal 1. Prepare the car for work (see " Preparing a car for technical inspection and repair "). 2. Remove the radiator grille (see " Radiator grille - removal and installation "). 3. We remove the...

Front bumper — removal and installation
Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the radiator grille (see " Radiator grille - removal and installation "). 3. Using a Phillips...

Front fender liner — removal and installation
Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the front wheel (see " Wheel - replacement "). 3. Using a TORX T20 key, unscrew the three screws...

Front wing — removal and installation
Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Remove the mudguard of the wing being removed (see " Front fender liner - removal and installation ")....

Air intake grille — removal and installation
Removal 1. Remove the windshield wiper arms (see " Windscreen wiper - removal and installation "). 2. Using a slotted screwdriver, remove three decorative plugs from the grille. 3. Using a TORX T20...

Battery Shelf — Removal and Installation
Removal 1. Partially drain the coolant so that the liquid level is below the expansion tank (see " Coolant - Replacement "). 2. Remove the battery (see " Battery - Removal and Installation "). 3....

Windshield — Replacement
To complete the work you will need an assistant, as well as: sharp knife; glue gun; glass Sealant Cutting String; a heated room in which the car can be left without moving while the glue dries; glass...

Fuel filler cap — removal and installation
Removal 1. Prepare the car for work (see " Preparing a car for technical inspection and repair "). 2. Using a 7 mm socket wrench, unscrew nut 1 securing the plug leash. Using a Phillips screwdriver,...

Rear bumper — removal and installation
Note: It is more convenient to perform the work with an assistant. You can also remove the rear wheels for ease of work (see " Wheel - replacement "). Removal 1. Prepare the car for work (see "...

Gas door struts — replacement
To complete the work you will need a wooden strip about 1.5 m long. Removal 1. Prepare the car for work (see " Preparing the car for maintenance and repair "). 2. Open the trunk door and install a...

Tailgate Trim — Removal and Installation
When removing the upholstery, there is a high probability of damaging the holders. Therefore, it is recommended to purchase spare holders (4 pcs., see. " Door trim - removal and installation ")....

Door lock switch (cylinder) — removal and installation
Removal 1. Remove the door trim (see " Tailgate Trim - Removal and Installation "). 2. Disconnect the rod from the lock switch. 3. Using a 10 mm socket wrench, unscrew the two nuts securing the...

Tailgate Lock — Removal, Installation and Adjustment
Removal 1. Remove the door trim (see " Tailgate Trim - Removal and Installation "). 2. Disconnect the rod from the lock switch (see page above, " Switch (cylinder) of the lock - removal and...

Rear glass — replacement
The rear window of the car is glued to the frame of the trunk door. The glass can be replaced without removing the door from the car. An assistant will be needed to complete the job. Sequence of...

Tailgate — Removal and Installation
Note: This is a labor-intensive job and should only be done as a last resort. Power is supplied to the door electrical equipment via two wire harnesses laid along the rear pillars. To remove the door...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Body and interior: Exterior (external elements) Lada Granta 1 (2011-2023, VAZ-2190)
• Body and interior: Exterior (external elements) Lada Priora 1 (2007-2018, VAZ-2170)
• Body and interior: Exterior (external elements) Lada Vesta 1 (2015-2023, VAZ-2180)
• Body and interior: Exterior (external elements) Lada Largus 1 (2012-2023)
• Body and interior: Exterior (external elements) Lada X-Ray 1 (2015-2022)

Link to this section in various formats

TEXTHTMLBB Code