Steering: reference data Table 11.1. Basic data for control, adjustment and maintenance Table 11.2. Tightening torques for threaded connections
Steering: design description Electric power steering and tilt-adjustable steering column. The steering wheel is mounted on the splines of the steering shaft and fixed with a self-locking nut. On vehicles equipped with a driver's...
Checking the technical condition of the steering An assistant is required to complete the work. Execution sequence 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Visually check the condition of the...
Steering wheel — removal and installation Comment. The work is shown on a car equipped with an airbag. Operation on a vehicle without an airbag is carried out in the same way. Removing 1. We prepare the car for work (see « Preparing the car...
Tie Rod End — Replacement You will need a ball joint puller to do the job. Removing 1. We prepare the car for work (see « Preparing the car for maintenance and repair »). 2. Remove the front wheel from the side of the tip to...
Tie rod — removal and installation Comment. This section shows the removal of the left tie rod. We remove the right thrust in the same way. To perform the work, a viewing ditch or overpass is required. Removing 1. We prepare the car...
Steering Gear Protector — Replacement To perform the work, you will need new plastic clamps for securing the protective cover of the steering mechanism. Removing 1. Disconnect the intermediate shaft of the steering column from the...
Steering column — removal and installation Comment. Depending on the purpose of the work, the steering column can be removed complete with the steering wheel and steering column switches. The operation is shown with partial disassembly of the...
Steering gear — removal and installation An assistant is required to complete the work. Removing 1. Disconnect the tie rod ends from the levers of the front suspension struts (see « Tie Rod End - Replacement »). Warning! On vehicles with an...