Design features, rear suspension device The rear suspension beam consists of two trailing arms 13 (pic. 6.2) and connector 12, which are welded together through amplifiers. In the rear part, brackets 14 with lugs for attaching shock...
Rear suspension malfunctions, their causes and solutions Cause of malfunction Remedy Noise (knock) in the suspension when the car is moving Faulty rear shock absorbers Loose shock absorbers or worn shock absorber eye bushings and rubber bushings Wear of...
Replacing the rear shock absorber and rear suspension spring To replace the rear shock absorber and rear suspension spring on a car, you will need: «for 6», box key «at 17», two keys «at 19». 1. Unfold the rear seat on the appropriate side (see « Folding the...
Replacing the rear hub bearing A double-row ball bearing is installed in the rear hub, which does not require adjustment and lubrication during vehicle operation. If, when the wheel is suspended, there is play or noise during...
Replacing the rear suspension beam It is more convenient to remove the rear axle from the car on a lift. If it is not possible to put the car on a lift, carefully raise the rear of the car by placing the jack under the beam. Then...
Checking and adjusting wheel alignment Checking and adjusting wheel alignment (collapse convergence) performed on special stands according to the operating instructions of the stand. Wheel alignment angles on the car in running order:...