Car exhaust system Lada Kalina 1

Design features of the exhaust system
Exhaust gases are discharged from the engine through the exhaust manifold 5 (figure 4.10), combined with a neutralizer (catalyst), additional muffler 1 and main muffler 15. Two oxygen concentration...

Replacing rubber cushions of the exhaust system suspension
On a car, the rubber suspension mounts of the exhaust system are replaced if, due to their damage or excessive deformation, the system elements begin to knock when in contact with the body or other...

Replacing the main muffler
1. To replace the main muffler on a vehicle, do the following: unscrew the nuts of the two clamp bolts securing the main muffler pipe to the additional muffler pipe, remove one of the bolts and...

Replacing the additional muffler
1. To replace the additional muffler on a vehicle, do the following: disconnect the pipes of the additional and main mufflers (see " Replacing the main muffler "). 2. Bend back tab 1 of the locking...

Replacing the catalytic converter
To replace the catalytic converter on your car, you will need: 13, 17, 19, 22 keys, and a 13 socket head. 1. Remove the decorative engine cover (see " Removal and installation the decorative engine...

Removal and installation of thermal screens
Removal and installation of the catalytic converter heat shield are described in the process of replacing the additional muffler (see " Replacing the additional muffler "). 1. To remove the rear heat...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Power unit: Exhaust system Lada Granta 1 (2011-2023, VAZ-2190)
• Power unit: Exhaust system Lada Priora 1 (2007-2018, VAZ-2170)
• Power unit: Exhaust system Lada Vesta 1 (2015-2023, VAZ-2180)
• Power unit: Exhaust system Lada Largus 1 (2012-2023)

Link to this section in various formats

TEXTHTMLBB Code