Car exhaust system Lada Priora 1

Design features of the exhaust system
Figure 5.24. Exhaust system: 1 – main muffler; 2 – suspension cushions for the main and additional mufflers; 3 – sealing ring; 4 – clamp; 5 – additional muffler; 6 – exhaust manifold gasket; 7 –...

Replacing the exhaust system suspension cushions
The rubber mounts of the exhaust system suspension are replaced if, due to damage or excessive deformation, the system elements begin to knock when in contact with the body or other vehicle...

Replacing the main muffler
1. Loosen the lower nut of the clamp securing the pipes of the main and additional mufflers, and unscrew the upper nut completely.. 2. …remove the bolt and remove the clamp. 3. Disconnect the pipes...

Replacing the additional muffler
1. Disconnect the hinged connection of the pipes of the additional and main mufflers (see "Replacing the main muffler" ). 2. Bend back tab 1 of the locking plate and two locking tabs 2 of the...

Replacing the cathode collector
The nuts securing the exhaust manifold to the cylinder head are difficult to access. In addition, the flange of the exhaust manifold is sealed with a metal-reinforced gasket. The sealing gasket must...

Removal and installation of thermal screens
The exhaust system reaches high temperatures during engine operation. Therefore, if there is mechanical damage or severe corrosion of the heat shields installed between the system elements and the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Power unit: Exhaust system Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Power unit: Exhaust system Lada Granta 1 (2011-2023, VAZ-2190)
• Power unit: Exhaust system Lada Vesta 1 (2015-2023, VAZ-2180)
• Power unit: Exhaust system Lada Largus 1 (2012-2023)

Link to this section in various formats

TEXTHTMLBB Code