Car clutch repair Lada Priora 1

Clutch design features
Figure 6.1. Clutch: 1 – cable tip leash; 2 – clutch release fork lever; 3 – clutch housing; 4 – bolt securing the clutch to the flywheel; 5 – pressure plate; 6 – flywheel; 7 – driven disk; 8 –...

Possible clutch malfunctions
Possible clutch malfunctions, their causes and solutions

Removal and installation the clutch
You will need: a spanner "8" (a socket head is more convenient), big screwdriver... ...mandrel for centering the driven disk (can be made from the primary shaft of the gearbox by removing the gears)....

Replacing the clutch release bearing
1. Remove the gearbox from the vehicle (see "Removal and installation of the gearbox" ). 2. Disengage the ends of the spring retainer from engagement with the bearing sleeve. 3. Remove the bearing...

Replacing the clutch release fork
You will need: a screwdriver, pliers. 1. Remove the clutch release bearing (see "Replacing the clutch release bearing" ). 2. Carefully pry up the rubber protective cover 1 with a screwdriver and...

Replacing the clutch release cable
You will need: 8 mm and 17 mm wrenches, calipers or a ruler. 1. In the passenger compartment, under the instrument panel, use an 8 mm spanner to loosen the nut securing the cable sheath stop to the...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Transmission: Clutch Lada Kalina Hatchback (2004-2013, VAZ-1119)
• Transmission: Clutch Lada Granta 1 (2011-2023, VAZ-2190)
• Transmission: Clutch Lada Vesta 1 (2015-2023, VAZ-2180)
• Transmission: Clutch Lada Largus 1 (2012-2023)
• Transmission: Clutch and drive shafts Lada X-Ray 1 (2015-2022)

Link to this section in various formats

TEXTHTMLBB Code