Car clutch repair Lada Kalina 1

Clutch Elements Reference Data
Table 9.1.1. Basic data for monitoring, adjustment and maintenance Table 9.1.2. Tightening torques for threaded connections

Description of the clutch design
The car is equipped with a single-plate dry clutch with a central pressure spring. The clutch release drive is cable-type, gap-free, with an automatic cable length adjustment mechanism. The clutch...

Checking the technical condition of the clutch
Clutch in engaged position (with the pedal released) should not "slip" and transmit torque from the engine to the transmission without loss, and when the clutch pedal is pressed, completely...

Clutch release drive — adjustment
The clutch release drive is equipped with an automatic cable length adjustment mechanism, so no systematic adjustment of the drive is required during vehicle operation. It is performed after repairs...

Clutch cable — replacement
The cable is replaced if it breaks, gets stuck in the casing, or is overstretched, or if the cable length adjustment mechanism is faulty. Removal 1. Remove the air filter (see " Air filter - removal...

Replacing the driven clutch disc
Recommendation. When replacing the driven clutch disc, it is advisable to also replace the pressure plate (basket), even if there are no noticeable signs of wear on its working surface. The fact is...

This section is available on russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

More sections with information from manuals for Lada:

• Transmission: Clutch Lada Granta 1 (2011-2023, VAZ-2190)
• Transmission: Clutch Lada Priora 1 (2007-2018, VAZ-2170)
• Transmission: Clutch Lada Vesta 1 (2015-2023, VAZ-2180)
• Transmission: Clutch Lada Largus 1 (2012-2023)
• Transmission: Clutch and drive shafts Lada X-Ray 1 (2015-2022)

Link to this section in various formats

TEXTHTMLBB Code