Clutch reference Table 9.1.1. Basic data for control, adjustment and maintenance Full travel of the clutch pedal, no more than, mm 146 Permissible movement of the lower cable leader relative to the clutch release...
Checking the technical condition of the clutch The clutch is switched on (with the pedal released) shouldn't «slip» and without loss to transfer torque from the engine to the transmission, and with the clutch pedal depressed, completely...
Clutch release actuator — adjustment The clutch release drive is equipped with a mechanism for automatically adjusting the length of the cable, therefore, during the operation of the vehicle, systematic adjustment of the drive is not...
Clutch cable — replacement We replace the cable if it breaks, jams in the sheath or is excessively pulled, as well as if the mechanism for adjusting the cable length malfunctions. Removing 1. Remove the air filter (« Air...
Clutch pedal sensor — replacement The need to perform work is determined when diagnosing malfunctions of the engine control system (« Checking the technical condition of the engine management system »). Removing 1. We prepare the car...
Clutch — replacement Recommendation. When replacing the clutch disc, it is advisable to replace the pressure plate as well (basket), even if there are no visible signs of wear on its working surface. The fact is that...