Removing
1. We prepare the car for work (see «Preparing the car for maintenance and repair»).
2. On both sides of the steering column, use a Phillips screwdriver to unscrew two self-tapping screws...
... and two screws for attaching the pads to each other 2. Using the same screwdriver, unscrew the three self-tapping screws 1 for attaching the bottom pad to the steering column.
3. Move the steering column locking lever down to the stop and lower the steering column.
4. Remove the bottom cover, bringing the lever through the hole.
5. Remove the rubber ring from the switch (castle) ignition.
6. Remove the top cover of the steering column.
Installation
Install pads in reverse order.