Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Using a Phillips screwdriver, unscrew the two screws on both sides of the steering column...
Using the same screwdriver, unscrew the two pins that secure the pads to each other 2 and the three screws 1 that secure the lower pad to the steering column.
3. Move the steering column locking lever down to the stop and lower the steering column. We remove the ignition switch trim.
4. Remove the lower cover, removing the lever through the hole.
6. Remove the upper steering column cover.
Installation
We install the pads in the reverse order.