Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the mudguard of the wing being removed (see "Front fender liner - removal and installation").
3. Remove the side turn signal (see "Side direction indicator - removal, bulb replacement and installation").
4. Remove the front bumper (see "Front bumper - removal and installation").
5. Clean the head of the screw of the lower wing mount from mastic and unscrew it with an 8 mm wrench.
6. Open the front door and use an 8 mm socket wrench to unscrew the rear wing mounting screw.
7. Using a wrench of the same size, unscrew the two screws of the front wing mount.
8. Using a Phillips screwdriver, unscrew one screw 1 and using an 8 mm socket wrench, unscrew three screws 2 of the upper wing mount.
9. Carefully cut the layer of sealant from the inside of the wing with a knife and remove the wing.
Installation
We install the wing in the reverse order. Before tightening the screws, we achieve an even gap between the wing, front door and hood.