Note: It is more convenient to perform the work with an assistant. You can also remove the rear wheels for ease of work (see "Wheel - replacement").
Removal
1. Prepare the car for work (see "Preparing a car for technical inspection and repair").
2. Using a TORX T20 key, unscrew the three screws securing the rear wheel mudguard and remove the mudguard.
3. Similarly, remove the mudguard from the other side of the rear bumper.
4. Using a Phillips screwdriver, unscrew the two bumper mounting screws on the right and left sides of the car.
[Original text on the website: LADAMAN.RU]
5. Using a 10 mm socket wrench, unscrew the two screws of the lower bumper mount.
6. Using the same key, unscrew the four screws of the upper bumper mount.
7. On both sides of the car, we disengage the edges of the bumper from the rear wing and remove the bumper.
8. Using a 10 mm socket wrench, unscrew the three nuts securing the bumper reinforcement to the body and remove the reinforcement.
Installation
We install the rear bumper in the reverse order.