Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Remove the radiator grille (see "Radiator grille - removal and installation").
3. Using a Phillips screwdriver, unscrew the three screws securing the front part of the front fender liner to the bumper. We perform a similar operation on the other side of the car.
4. Using a 10 mm socket wrench, unscrew the three bolts of the lower bumper mount (one on the right side and two in front).
[Data obtained from the website: ladaman]
5. Using a Phillips screwdriver, unscrew the two screws securing the grille to the bumper (they are located on both sides of the grille).
6. Remove the grille from the bumper.
7. On cars with fog lights, disconnect the wire connectors from them.
8. Using a Phillips screwdriver, unscrew the two screws that secure the lower bumper mount to the energy-absorbing beam.
9. Using a 10 mm wrench, unscrew the two bolts 1 and use a Phillips screwdriver to unscrew the two screws 2 that secure the upper bumper to the energy-absorbing beam.
10. On both sides of the car, we disengage the edges of the bumper from the front fenders and remove the bumper.
11. Using a 13 mm socket wrench, unscrew the four nuts (two on each side) fastenings of the energy-absorbing bumper beam and remove the beam.
Installation
We install the bumper in the reverse order.