1. Maintenance operations performed after the first 2500 km of a new vehicle:
Make sure that there are no extraneous noises or knocks when the engine is running.
Check the tightness of the fasteners of the power unit supports (see table 8.1.2).
Make sure there are no engine oil leaks through the engine seals and oil seals (see "Checking the technical condition of the engine").
Replace engine oil and oil filter (see "Engine Oil and Oil Filter - Replacement").
Make sure there are no coolant leaks, check the condition of the hoses and radiator of the engine cooling system (see "Checking the technical condition of the cooling system").
Check the tightness of the fuel lines and hoses (see "Checking the technical condition of the power supply system").
Check functionality (by the presence of fault codes) engine management systems (see "Checking the technical condition of the engine management system").
Check the tightness of the exhaust system and the condition of the muffler suspension parts (see "Checking the technical condition of the exhaust system").
Make sure that there are no extraneous noises when engaging and disengaging the clutch (see "Checking the technical condition of the clutch").
Check the tightness and, if necessary, tighten the camshaft covers (see "1.6i Engine Camshaft - Removal and Installation")*.
Adjust the thermal clearances in the valve timing mechanism (see "Adjusting the clearances in the timing drive of the 1.6i engine")*.
Check the clutch pedal travel (see "Checking the technical condition of the clutch").
Make sure there are no transmission oil leaks through the gearbox seals and oil seals (see "Checking the technical condition of the gearbox").
Check the condition of the protective covers of the joint and gear shift rod (see "Gear shift drive - removal, disassembly, installation and adjustment").
Check the clarity of gear shifting, make sure there are no extraneous noises or knocks in the operation of the gearbox (see "Checking the technical condition of the gearbox").
Make sure that there are no extraneous noises in the front wheel drive joints when the vehicle is moving in a straight line and when turning (see "Checking the technical condition of the front wheel drives").
Check the condition of the protective covers of the front wheel drive joints (see "Checking the technical condition of the front wheel drives").
Check the condition of the tires and rims (see "Checking the technical condition of wheels, tires and hubs").
Check and, if necessary, balance the wheels (see "Checking the technical condition of wheels, tires and hubs").
Make sure that there are no extraneous noises in the front and rear suspensions when the vehicle is driven over uneven surfaces (see "Checking the technical condition of the front suspension" and "Checking the technical condition of the rear suspension").
Check the condition of the front and rear suspension parts (see "Checking the technical condition of the front suspension" and "Checking the technical condition of the rear suspension").
Adjust the direction of the headlight beams (see "Headlight unit - light adjustment").
Check the condition of the protective covers of the steering rods and steering gear (see "Checking the technical condition of the steering").
Make sure the electric power steering is working properly (see "Checking the technical condition of the steering").
Make sure there are no brake fluid leaks, check the condition of the hoses and tubes of the hydraulic brake system (see "Checking the technical condition of the brake system").
Check and, if necessary, adjust the position of the brake light switch (see "Brake pedal free play - adjustment").
Check the operation of the parking brake (see "Checking the technical condition of the brake system").
Check the efficiency of all brake mechanisms (see "Checking the technical condition of the brake system").
Check the brake fluid level in the master cylinder reservoir (see "Brake fluid level in the master cylinder reservoir - checking").
Make sure the generator is in good working order (see "Generator - check").
Make sure that the lighting system lamps, light signaling system and sound signal are in good working order (see "Lighting, light and sound signaling").
Check the functionality of the electric headlight corrector (see "Governing bodies").
Check and, if necessary, adjust the wheel alignment angles (see "Front Wheel Alignment - Check").
Make sure that the indicator lights in the instrument panel are working properly (see "Control and measuring instruments and sensors").
Check the serviceability of the windshield wipers and washers in all operating modes (see "Windscreen wipers and washers").
Check the serviceability of the rear window heating (see "Governing bodies").
Check the serviceability of the electric window lifts and outside mirrors (see "Governing bodies").
Check the functionality of the seat heating (see "Governing bodies").
Make sure that the door and hood locks are in good working order (see "Checking the technical condition of the body").
Check the heater for proper operation (see "Checking the technical condition of the ventilation and heating system").
2. After every 15,000 km of vehicle mileage, it is necessary to perform all operations (except those marked with "*") performed at 2,500 km mileage, as well as:
Check the condition and tension of the timing belt (see "Timing belt drive engine 1.6i - checking the condition and adjusting the tension" and "Timing Belt - Checking Condition").
Check the coolant level in the expansion tank of the engine cooling system (see "Checking the technical condition of the cooling system").
Check the condition and tension of the generator drive belt (see "Generator Drive Belt - Checking Condition and Adjusting Tension").
Check the amount of play in the steering (see "Checking the technical condition of the steering").
Check the degree of wear of the front brake shoe linings (see "Brake pads - checking for wear").
Check the gearbox oil level (see "Gearbox - Checking the level and changing the oil").
Check the degree of wear of the rear brake shoe linings (see "Brake pads - checking for wear").
Check the level and density of the electrolyte in the battery (see "Battery - Maintenance").
Lubricate the hinges and door opening limiters (see "Body maintenance").
Clean the drainage holes in the doors and sills (see "Body maintenance").
Replace the filter element of the cabin ventilation system (see "Cabin ventilation and heating filter - replacement").
3. After every 30,000 km of vehicle mileage, it is necessary to perform all operations performed at every 15,000 km mileage, as well as:
Replace the fuel filter of the engine fuel system (see "Fuel filter - replacement").
Check the functionality of the brake system hydraulic pressure regulator (see "Rear Brake Fluid Pressure Regulator - Adjustment").
Replace the air filter element (see "Air filter - replacing the filter element").
Replace spark plugs (see "Spark plugs - replacement" and "1.6i Engine Spark Plugs - Replacement").
Clean and lubricate the battery terminals and posts (see "Battery - Maintenance").
Lubricate the door and hood locks (see "Body maintenance").
4. After every 45,000 km of vehicle mileage, it is necessary to perform all operations performed at every 15,000 km mileage, as well as:
Adjust the thermal clearances in the valve timing mechanism (see "Adjusting the clearances in the timing drive of the 1.6i engine").
Replace the brake fluid in the hydraulic brake system (see "Hydraulic brake drive - brake fluid replacement").
Check the functionality of the brake booster (see "Vacuum brake booster - check").
Clean the commutator, check for wear and lubricate the starter drive parts (see "Starter - repair").
Lubricate the hood lock drive cable (see "Hood Lock Drive Rod - Replacement").
5. After every 60,000 km of vehicle mileage, it is necessary to perform all operations that are performed at every 15,000 km mileage.
6. After every 75,000 km of vehicle mileage, it is necessary to perform all operations performed at every 15,000 km mileage, as well as:
Replace the timing belt (see "Timing Belt - Replacement" or "Timing belt for 1.6i engine - replacement").
Change the gearbox oil (see "Gearbox - Checking the level and changing the oil").
Replace the coolant in the engine cooling system (see "Coolant - Replacement").
Replace the oxygen concentration sensor (see "Oxygen Concentration Sensor - Checking and Replacing").