Removal and installation electric power steering (Kalina 1118)

To remove and install the electric power steering on a car, you will need: flat- and Phillips-head screwdrivers, a 12 mm wrench, two 13 mm wrenches, and a 13 mm socket wrench.

1. Disconnect the wire from the negative terminal of the battery.

2. Remove the steering wheel (see "Removal and installation the steering wheel").

3. Remove the steering column switches together with their base (see "Checking and replacing steering column switches").



4. Remove the three screws securing the instrument panel amplifier and remove the amplifier.



5. Disconnect the wiring harness connectors from the electric power steering terminals.



6. Mark the relative positions of the universal joint and the electric power steering shaft...





7. ...unscrew the nut of the universal joint clamp bolt and remove the bolt from the clamp.



8. Unscrew the two nuts of the front...



9. ...the two rear mounting nuts and remove the electric power steering from the vehicle.

10. Install the electric power steering on the vehicle in the reverse order of removal.