To remove and install the steering wheel on a car, you will need: a flat-blade screwdriver, a hex wrench «for 4».
1. Disconnect the wire from the terminal «minus» battery.
2. Set the steering wheel to the position corresponding to the rectilinear movement of the car.
3. Turn out two screws of fastening of the switch of a sound signal...
4.... and disconnect the connector with the horn switch wire from the steering wheel output.
5. Mark an arrangement of a steering wheel on a steering shaft.
6. Loosen the tightness (without opening completely) steering wheel nuts on the steering shaft...
7.... knock the steering wheel off the steering shaft with sharp blows, unscrew the fastening nut and remove the steering wheel from the car.
8. Establish on the car a steering wheel upside-down according to marks put earlier on a steering wheel and a steering shaft.