Adjusting the seat and steering wheel position (Vesta 2180)

The design of the front seats allows them to be moved longitudinally, as well as changing the angle of the backrest. Handle 1 is used to adjust the position of the cushion in the longitudinal direction. On the outside of the seat there is a lever 2 for adjusting the tilt of the backrest. To move the backrest, pull the lever up. Depending on the configuration, in some vehicles the driver can adjust the height of the seat cushion using lever 3, located on the left side of the seat. To raise the seat, pull the lever up; to lower it, move it down. The seat back is equipped with adjustable lumbar support, the handle of which is located on the side, on the left side.

The steering wheel position can be adjusted in height. To adjust, pull the locking lever located under the steering column.

Warning! Do not adjust the driver's seat or steering wheel while the vehicle is moving, as this may result in loss of control of the vehicle.

The seats are equipped with height-adjustable headrests. To change the height adjustment of the headrest, you need to press the lock on the guide trim and adjust the headrest.

The headrest must be adjusted to a position where the back of the head rests on the central part of the headrest. To remove the headrest, press the latches and then pull the headrest up.

Article copied from this portal www.Ladaman.ru

When adjusting the seat position, please follow these rules.

1. With the brake pedal fully depressed, your right leg should be slightly bent at the knee.
2. The rim and hub of the steering wheel must not cover the instrument panel.
3. The wrist of the outstretched arm should rest on the top of the steering wheel rim (your back should not come off the back of the seat).