Manual air conditioning control unit: 1 - air temperature control knob; 2 - Air flow distribution switches with indicator lights; 3 - fan speed control knob; 4 - information display of the air conditioning control unit; 5 - switch for rear and windshield heaters (depending on the configuration) glass with control lamp
To select the fan speed, turn knob 3 to the appropriate position.
By turning knob 1 to different positions, you can select the desired temperature in the car interior (blue sector - cool, red - warm).
To select the direction of air flow distribution, press the corresponding switch button 2 (the direction of the flows is indicated on the pictograms by arrows).
The climate control system only works when the ignition is on.
Depending on the configuration, the car may be equipped with a climate control system with air conditioning.
Climate control unit with air conditioning and manual control: 1 - air temperature control handle; 2 - air conditioner switch; 3 - Air flow distribution switches with indicator lights; 4 - air recirculation switch; 5 - fan speed control knob; 6 - air recirculation off indicator lamp; 7 - information display; 8 - switch for rear and windshield heaters (depending on the configuration) glass with control lamp; 9 - Air conditioner off indicator light
To turn the air conditioner on or off, press button 2. Switching the air conditioning system to air conditioning mode is only possible when the engine and heater fan are running. When the air conditioner is turned on, the corresponding indicator lamp lights up.
To turn the recirculation mode on or off, press button 4. When the recirculation mode is activated, the flow of outside air into the passenger compartment stops.
Note: Operation of the air conditioning system in recirculation mode for a long time (especially in the cold season) causes the glass to fog up, so turn on this mode for short periods of time: for example, to overcome dusty or smoky sections of the road.
Note: To quickly remove fog and frost from the windshield, turn on the maximum speed of the heater fan, turn the temperature control knob all the way clockwise, turn on the air conditioner and windshield heating (depending on the configuration), and direct the air flow to the windshield.
Automatic climate control unit (climate control): 1 - air temperature control handle; 2 - climate control switch; 3 - Air flow distribution switches; 4 - air recirculation switch; 5 - fan speed control knob; 6 - air recirculation off indicator lamp; 7 - information display; 8 - button to turn on the climate control in AUTO mode; 9 - switch for rear and windshield heaters (depending on the configuration) glass; 10 - Windshield defroster switch; 11 - Climate control off indicator lamp
To turn on the air conditioning system in automatic mode, press switch 8 and set the required temperature using knob 1.
In AUTO mode, the operation of the air conditioning system is controlled automatically depending on the air temperature in the vehicle interior. It is controlled by temperature sensors. Based on the signals from the sensors, the control unit changes the temperature of the air flow, its direction and the intensity of the electric fan.
Automatically controlled climate control system (climate control) can be controlled manually. To do this, we use the air flow distribution mode switches to select the direction of the air flows, and use the electric fan speed controller to select their intensity.
To select the direction of air flow distribution, press the corresponding switch button 2 (the direction of the flows is indicated on the pictograms by arrows). Moreover, one or two buttons can be pressed simultaneously. In this case, the control lamps of the corresponding modes will be turned on above the buttons.
The "maximum windshield defogging" mode is used to quickly eliminate fogging or icing of the glass. When button 10 is pressed, the entire air flow is directed to the windshield and front door windows in the driver's field of vision, and the air conditioner is also forcibly turned on.