Warning! Always fasten your seat belt and make sure that all passengers are fastened, unbelted passengers in an accident can harm not only themselves, but also those who were fastened.
In order to fasten the belt, insert the tongue of yarn into the buckle until it clicks.
If the belt is blocked when it is pulled out sharply, you must first release the belt and ensure it is wound on the inertial coil, and then slowly pull it out again.
To unfasten the belt, press the lock button.
Warning! If the belt has been critically loaded in an accident or has tears, it should be replaced.
Front seat belts
To reduce the height of the belt attachment, press the latch and move the loop down.
You can move the lever up without pressing the latch.
When properly adjusted, the belt should be positioned as shown in the photo.
Warning! Improper adjustment of the seat belt height can lead to additional injuries in an accident.