To remove and install the fuel rail on the car, you will need: hex wrench «by 5», screwdriver, wrench «at 17» (two).
1. Reduce the pressure in the engine power system (see «Reduced fuel pressure in the engine power system»).
2. Disconnect the wire from the terminal «minus» battery.
3. Remove the decorative engine cover (see «Removal and installation of a decorative casing of the engine»).
4. Disconnect the connector of the injector wiring harness and the engine harness by depressing the retainer.
5. Turn away the union of a tube of a supply of fuel and disconnect a fuel hose from a tube of a fuel stage.
6. Turn out two bolts of fastening of a fuel stage to an inlet pipe.
7. Gently slide the fuel rail along the axis of the injectors so that all the injectors come out of the holes in the intake pipe and remove the fuel rail along with the injectors and wiring harness.
8. Install the fuel rail on the car in the reverse order of removal, lubricating the O-rings of the nozzles with engine oil.
9. Having installed the fuel rail on the inlet pipe and connected the pipeline to the rail, start the engine on the car and check the tightness of the connection of the pipeline and nozzle seals.