Removal
1. Drain the coolant (see "Coolant - Replacement").
2. Remove the rear timing belt cover (see "Camshafts - Removal and Installation").
3. Using a 5 mm Allen key, unscrew the three bolts securing the coolant pump.
4. If necessary, using a screwdriver, remove the pump and gasket from the cylinder block.
Installation
We install the cooling pump in the reverse order, replacing the pump gasket with a new one.
Note: Pumps with rubber sealing ring may be supplied as spare parts. No gasket is installed under such pumps.
Material was taken from the website: LADAman.ru