Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
Advice: If there is a lot of antifreeze in the tank, in order to save money, you can remove the washer reservoir (see below) and, without removing the electric pump, pour the liquid into a canister.
2. Disconnect the two wiring blocks from the windshield washer electric pump (after marking the block connected to the "+" terminal).
3. Using a screwdriver, remove the electric pump from the hole in the tank and disconnect the elastic tube from the pump.
4. Check the condition of the rubber seal installed in the tank opening. If replacement is necessary, remove the seal and install a new one.
5. Similarly, remove the rear window washer electric pump.
(The source is located on the website: LADAman.ru)
Installation
We install the windshield washer electric pumps in the reverse order.