Removal
1. Prepare the car for work (see "Preparing the car for maintenance and repair").
2. Disconnect the wire blocks from the windshield washer electric pumps, having previously marked the blocks connected to the "+" terminal (see "Windscreen Washer Pumps - Removal and Installation").
Note: If there is a lot of antifreeze in the tank, then in order to save money, you should remove the windshield washer tank without disconnecting the tubes from the electric pumps.
3. Using an 8 mm socket wrench, unscrew the nut of the front tank mount.
4. Having moved the tubes to the side, using the same key, unscrew the nut of the rear tank mount.
5. Raise the tank.
6. Drain the liquid into the canister through the filler neck.
7. Disconnect the tubes from the pumps and remove the tank.
Article based on information from the website LADAMAN
Installation
We install the tank in the reverse order. We fill it with washer fluid.