Removal
1. Prepare the car for work ("Preparing the car for maintenance and repair").
2. Disconnect the wiring blocks from the windshield washer electric pump, having previously marked the block connected to the "+" terminal (see "Windscreen washer pump - removal and installation").
Note: If there is a lot of antifreeze in the tank, then in order to save money, you should remove the windshield washer tank without disconnecting the tube from the electric pump. Then drain the liquid into the canister through the filler neck.
3. Disconnect the tube from the pump.
4. Using a 10 mm socket wrench, unscrew the nut of the front tank mount.
5. Remove the tank, removing its protrusion from the body opening.
Installation
We install the tank in the reverse order. We fill it with washer fluid.
Article copied from this portal ladaman.ru