2. Disengage the ends of the spring retainer from engagement with the clutch release bearing sleeve.
3. Remove the clutch release bearing from the guide sleeve.
4. Press the four tabs of the spring holder and remove the holder. Then remove the clutch bearing from the clutch.
5. Check the new bearing before installation. It should rotate easily, without jamming and without any play.
6. Install the clutch release bearing onto the coupling (the protruding part of the inner ring must be directed away from the coupling) and fix it with the holder.
7. Before installing the clutch release bearing on the vehicle, apply a thin layer of grease to the guide sleeve.
8. Secure the coupling with the clutch bearing using the spring retainer and install the gearbox in place.