The replacement of the air filter element is regulated - every 30,000 km. However, the condition of the air filter depends on the operating conditions of the car: on more dusty and polluted roads, the element becomes clogged faster.
To replace the air filter element on a vehicle, you will need a Phillips screwdriver.
1. Disconnect the wire from the terminal «minus» battery.
2. Wring out a clamp and disconnect a plait of wires from the gauge of the mass expense of air.
3. Turn out four screws of fastening of a cover of the air filter...
4.... lift the cover by slightly bending the air inlet, and remove the air filter element from the cover.
5. If necessary, remove dust and dirt from the air filter housing.
6. Install the new filter element in the cap, orienting it the same way as the old one.
7. Install the air filter cover together with the filter element and tighten the screws securing it.
8. Connect the wire harness connector to the mass air flow sensor.