Removing
Before removing the alternator drive belt, mark the direction of rotation with an arrow.
1. Remove the alternator drive belt (see «Alternator drive belt - replacing the belt and tensioner»).
2. Remove the wire ends from the contact bolt.
3. Disconnect the wires from the generator (see above, «Voltage regulator - replacement).
4. Using a 13 mm socket wrench, unscrew the nut of the bolt of the upper fastening of the generator.
5. Using a 17 mm socket wrench, unscrew the bolt of the lower mounting of the generator.
6. Remove the bolts from the generator bracket and remove the generator.
7. In order not to lose, we remove the nut and bolt sleeve from the generator bracket.
8. If necessary, remove the tensioner (see «Alternator drive belt - replacing the belt and tensioner») and, having unscrewed the three bolts with a 13 mm socket wrench, remove the generator bracket.
Installation
Install the generator in reverse order.
After installing the generator, adjust the tension of its drive belt (see «Alternator drive belt - condition check and tension adjustment»).