Removal, replacement and installation of the rear bumper (Kalina 1118)

To remove, replace and install the rear bumper on a car you will need: a Phillips-head screwdriver, a 10 mm spanner.



1. Remove the four screws securing the rear wheel mudguard.



2. Remove the rear wheel mudguard.



3. Remove one screw securing the rear bumper to the wheel arches...



4. ...three bolts of the lower rear bumper mount...





5. ...and four upper bumper mounting bolts.



6. Disengage the rear bumper latches from the body...



7. ...and remove the rear bumper from the car.



8. Unscrew the three mounting nuts...





9. ...and remove the bumper beam from the car.

10. Replace the rear bumper if necessary.

11. Install the rear bumper on the vehicle in the reverse order of removal.