The trunk lid lock is non-separable and cannot be repaired. Replace defective lock.
To remove, replace and install the trunk lid lock on a car, you will need: a key «on 10», flat and Phillips screwdrivers.
1. Disconnect the wire from the terminal «minus» battery.
2. Disconnect the rod from the lock drive (see «Removal, replacement and installation of the trunk lid lock drive»).
3. Disconnect the connector from the trunk lid lock wires...
4.... unscrew the three nuts securing the trunk lid lock...
5.... and remove the trunk lid lock together with the drive rod.
6. Turn out two screws of fastening of a latch of the lock of a cover of a luggage carrier...
7.... and remove the retainer.
8. Install the trunk lid lock and its drive in the reverse order of removal. Check the reliability and ease of opening the trunk lid lock.