Removal
1. Remove the door glass guide (see above, "Door glass - removal and installation").
2. After removing the plastic retainer, release the lock button rod.
3. Using a Phillips screwdriver, unscrew the intermediate rod mounting screw.
4. Using the same screwdriver, unscrew the screw that secures the inner handle of the lock to the door.
5. Using a Phillips screwdriver, unscrew the three screws securing the lock.
Article copied from a web page ladaman.ru
6. Remove the lock from the door, disconnect the wiring harness connector from it and remove the lock assembly with the rods and electric drive.
Installation
We install the lock in the reverse order.