Removing
1. We prepare the car for work (see «Preparing the car for technical inspection and repair»).
2. Use the power window handle to set the door glass to the upper position.
3. Remove the door trim (see «Door upholstery - removal and installation»).
4. We fix the glass with masking tape.
5. Using an 8 mm socket wrench, unscrew the three nuts securing the power window mechanism.
6. Using the same key, unscrew the two bolts securing 1 glass to the window guide.
Using a 10 mm socket wrench, unscrew the three nuts 2 fastening the window guide.
7. Remove the power window from the door through the bottom hole.
Installation
Install the window regulator in reverse order.