Removal
1. Prepare the car for work (see "Preparing a car for technical inspection and repair").
2. Using the window lift handle, lower the door glass.
3. Remove the door trim (see "Door trim - removal and installation").
4. Using a screwdriver, remove the inner glass seal.
5. After removing the seal from the door frame, use a Phillips screwdriver to unscrew the screw securing the glass trim.
(Article copied from the resource: LADAMAN.ru)
6. Using a screwdriver, pry up the top edge of the trim and remove the trim.
7. Using an 8 mm wrench, unscrew the glass guide mounting bolt.
8. Remove the lower end of the seal from the guide and take the guide out of the door.
9. Using a screwdriver, push out the retainer of the outer glass seal.
10. Remove the door frame seal.
11. Disconnect the glass from the window regulator (see "Window lifter - removal and installation").
12. Remove the glass from the door.
Installation
We install the glass in the reverse order.