Pointer (probe) oil level is located in the middle of the cylinder block behind the radiator of the cooling system.
Attention! Check the engine oil level by placing the Lada Kalina car on a flat horizontal platform. Before checking the oil level after a trip, stop the engine and wait 5-10 minutes until the oil drains into the sump.
Top up the engine with the same brand of oil that was previously used. The oil level in the crankcase must not exceed the mark «MAX», otherwise, leaks through gaskets and seals, as well as increased oil consumption, are possible. 1. Take out the pointer (probe) engine oil level, wipe it with a clean cloth and reinsert it.
2. Take out the pointer (probe) engine oil level. The oil film level must be between the marks «MIN» And «MAX». If the oil level approaches the mark «MIN» or below it, add oil to the engine.
3. Turn the oil filler plug 90°counterclockwise and remove it.
4. Install a funnel in the neck and pour oil into the engine, controlling the oil level according to the pointer (dipstick). Before removing the pointer (probe) engine oil level, wait 2-3 minutes to allow the oil to drain into the crankcase. The oil level must not exceed the mark «MAX».
5. After the engine oil level reaches the required level, reinstall the filler cap.