You will need a flat blade screwdriver to replace the exterior and instrument lighting control unit on your vehicle.
1. Disconnect the wire from the terminal «minus» battery.
2. Pry off the cover of the mounting block from the left and right sides...
3.... and lower the cover of the mounting block down.
4. Disconnect the wire connector from the control unit for outdoor lighting and instrument lighting and remove the cover of the mounting block from the instrument panel.
5. Bend the four plastic latches (in the photo, the location of the latches is shown by arrows) and remove the control unit for outdoor lighting and instrument lighting from the cover of the mounting block.
6. Establish on the car the block of management of external illumination and illumination of devices in an order, the return to removal.