To replace the headlight unit on a car, you will need a socket wrench «on 10».
1. Disconnect the wire from the terminal «minus» battery.
2. Remove the front bumper (see «Removal and installation of a forward bumper»).
3. Turn out two bolts of the bottom fastening of a headlight...
4.... bolt and screw of the upper headlight mounts.
5. Disconnect the harness connector from the turn signal bulb socket...
6.... from the terminals of the block headlight...
7.... and remove the headlamp.
8. Install the headlight on the car in the reverse order. To ensure uniform clearances between the headlight and fender, loosen the lower mount bracket nut.