Removal and installation the front door (Kalina 1118)

To remove and install the front door on the car you will need: a 10 mm socket wrench, a TORX T40 wrench.

1. Disconnect the wire from the negative terminal of the battery.

2. Disconnect the door limiter from the body pillar (see "Removal and installation the door opening limiter").



3. Disconnect the front door wire harness connector.



4. Remove the lower bolt of the front door hinge...



[The original was published on the portal: LadaMan.ru]



5. ...then the top door hinge bolt and remove the front door.

6. Install the front door on the vehicle in the reverse order of removal.