Removal and installation the rear door window regulator (Kalina 1118)

To remove and install the rear door window regulator on a car, you will need an 8 mm socket wrench.

1. Remove the rear door trim (see "Removal and installation the rear door trim").



2. Position the glass in a position that allows access to the screws that secure the glass bracket to the window lift mechanism, and remove the screws.



3. Unscrew the six nuts securing the window lift mechanism to the door...



4. ...and remove the window regulator through the lower access hole.

5. Install the window regulator on the vehicle in the reverse order of removal.