1. Disconnect the wire from the negative terminal of the battery.
2. Remove the door wiring harness protective cover from the body pillar...
3. ...and disconnect the door wire harness connector and the wiring harness.
4. Disconnect the door opening limiter (see "Removal and installation the door opening limiter").
5. Remove the lower and upper screws of the rear door hinges in the same way as you did when removing the front door (see "Removal and installation the front door"), and remove the rear door from the vehicle.
6. Install the rear door on the vehicle in the reverse order of removal.
(The material was taken from a website: LADAman.ru)