1. Remove the tailgate trim (see «Removal and installation of a covering of a back door»).
2. Install the handle on the power window mechanism and lower the glass on the rear door to its lowest position.
3. Pry off the inner seal of the rear door glass with a screwdriver...
4.... and remove the glass seal by sliding it back.
5. Pry up the decorative insert...
6.... and remove it, disengaging from the seal.
7. Pry off the rear door glass outer seal from the inside and remove it.
8. Remove a lateral sealant of glass of a back door.
9. Turn out the screw of fastening of a decorative slip of a window.
10. Remove the window trim.
11. Establish glass of a back door in situation at which access to the screws fastening an arm of glass with the mechanism of a window regulator is possible, and turn out screws.
12. Take glass from an aperture of a back door outside.
13. Establish on the car glass of a back door in an order, the return to removal.